Use a soft, lint-free cloth or paper towel and apply a liberal amount to an entire side or section of your project. Remove excess polyurethane quickly with a clean cloth, then buff lightly and briskly with another clean cloth, working in the direction of the grain until the surface is smooth with a slight wet look.Click to see full answer. Similarly, you may ask, how do you apply Old Masters gel stain?Application over Previously Finished Surfaces: Scuff sand surface before application. Remove dust. Apply a liberal coat of Gel Stain with a firm synthetic brush or lint-free rag and work the stain across and into the grain uniformly, feathering out streaks while stain is wet.One may also ask, how do you stain an old masters wiping? Apply stain liberally with brush, lint-free cloth, or spray until surface is completely wet. Allow to penetrate for 5 to 15 minutes. Wipe with a soft cloth, first across the grain, then with the grain. For a darker color, re-stain when first coat is dry. Accordingly, how long does oil based polyurethane take to dry? Time for oil-based polyurethane to dry: Hours 24-48, you can walk on the floors with socks. Avoid shoes and bare feet. And, make sure your pets (who usually have bare feet) do not walk on the floors during this time. After 4 days, you can move furniture back on to the floors.How long do you let gel stain sit before wiping off?To test, apply gel stain, let dry for 48 hours, and then try to scratch it off. If it comes off easily, then it’s not sticking, so don’t use it. If it’s hard to scratch off, then you should be good to go. Make sure on these types of surfaces to let them dry good and long, a minimum of 48 hours for each coat.
ncG1vNJzZmivp6x7pLHLnpmroaSesrSu1LOxZ5ufonuotI6hprBllKR6urvUZpipqJyuerC4w2akmqukmr%2B0ecaeo2aon6HGtr7ErZ%2BappVk